Optional Blower / Fan Installation - HAMPTON BAY H300 Owners & Installation Manual

Freestanding woodstove
Table of Contents

Advertisement

INSTALLATION
An optional blower is available for the Hampton
H300. The blower is factory assembled, wired
and ready for attachment to the stove.
This unit must be connected to a grounded,
standard 120 volts, 60 Hz electrical outlet.
Never route the power cord under or in front
of the unit.
Do not under any circumstances, cut or remove
the grounding prong from the power cord. Do
not use an adaptor plug.
NOTE: For more detailed information see
instructions included with the Optional
Blower.
CAUTION: Moving parts may cause injury.
Do not operate unit with blower housing
removed.
DANGER: Risk of electric shock. Discon-
nect power before servicing unit.
WARNING: Electrical Grounding
Instructions
This appliance is equipped with
a three pronged (grounding) plug
for your protection against shock
hazard and should be plugged
directly into a properly grounded
three-prong receptacle. Do not cut
or remove the grounding prong
from this plug.
Neutral
Live
Ground
120V AC
60 Hz
Fan Thermodisc
(normally open)
NOTE INPUT POWER: Australia, New Zealand,
China and Japan use 240V AC 50 Hz.
18

OPTIONAL BLOWER / FAN INSTALLATION

1) Lift off top.
2) Place left and right side air channels on
fi rebox top as shown below.
Left Side
Air Channel
3) Secure each air channel with one screw.
Right Side
Air Channel
Shown
4) Remove back shield by undoing 2 screws.
Manual/
Green
Auto
Switch
Switch
Black
Black
Black
Fan
Blower/Fan Wiring Diagram
Screws
Right Side
Air Channel
Secure
with screw.
Fan
Fan
Ground
5) Remove fan cover plate from back shield
by undoing 3 screws.
6) Loosen the 2 bolts you see after removing
the fan cover plate. One on each side of
unit.
7) Hook fan over bolts.
8) Tighten bolts to secure fan.
9) Reinstall back shield.
10) Using the 3 screws from the fan cover
plate, secure the fan assembly to the back
shield.
11) Plug-in power cord.
12) Place top back on.
CAUTION: Label all wires
prior to disconnection
when servicing controls.
Wiring errors can cause
improper and dangerous
operation.
Hampton H300 Cast Freestanding Woodstove
Right Side
Bolt

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents