8. Appendix
8. Appendix
BSHardware Setup
Switch 1: OFF
Switch 2: OFF
Figure 8.1. DIP Switch
Initial Setting
Table 8.1. Initial Setting List < 1 / 4 >
Item
Basic setting
Host name
DHCP Client
IPaddress
Subnet mask
Default gateway
AP construction
AP type
IP address of the master AP
IP address of the backup AP
Language setting
Password
Ethernet
Port speed
Link down sense
Ping parameter
Wireless LAN
Interface
Wireless LAN standard
Wireless link mode
Unit type
XR function
62
Wireless LAN
Link down condition
IP address
Transmission interval
(seconds)
Response wait time
Number of retries
Default setting
(No input)
Disable, enable
(Displayed on the housing sticker on the main unit)
255.0.0.0
0.0.0.0
Compatibility, integration
Normal, master, back up
0.0.0.0
0.0.0.0
English, Japanese
(No input)
Auto, 100M/full-duplex, 100M/half-duplex,
10M/full-duplex, 10M/half-duplex
Disable, enable
Link status, Ping
0.0.0.0
60, 1 - 65535
3, 0 - 15
3, 0 - 15
Enable, disable
IEEE802.11a, IEEE802.11g, IEEE802.11b
Standard, compatible, advanced (AP only)
AP, station
Disable, enable
NZ2WL - xxx