Mitsubishi NZ2WL-US User Manual page 66

5. Setup and Status Display
Wireless LAN information
■
- Wireless LAN Standard
Displays the currently operating wireless LAN standard.
- Wireless Link Mode
Displays the currently operating wireless LAN mode: Standard Infrastructure, Compatible Infrastructure,
or Advanced Infrastructure.
- Unit Type
Displays the current wireless LAN type: Access point or Station.
- Module ID
Displays the ID of the wireless device incorporated in this product.
- Wireless MAC address
Displays the MAC address of the wireless LAN card.
- Login AP
When the unit type is "Station", this displays the wireless MAC addresses of the access points logged in
to this product.
- ESSID
Displays the ESSID set for this product.
- Channel
Displays the wireless LAN channel used by this product.
- Transmission Rate
Displays the transmission rate (in Mbps) at which data is currently being transmitted.
- Receive Rate
Displays the transmission rate (in Mbps) at which data is currently being received.
- Number of login
When the unit type is "Access point", this displays the number of stations logged in to this product.
- RSSI
When the unit type is "Access point", this displays the received signal strength indication (RSSI) of the
unit, which is a measurement of the strength of the signal being received.
50
NZ2WL - xxx