Mitsubishi NZ2WL-US User Manual page 70

5. Setup and Status Display
Log Information
■
Log information recorded in this product is displayed. To clear log information, click "Clear log
information".
For main events displayed on the logs and their outlines, see the table below.
Table 5.8. Events to Be Logged
Event
Start
Link Up
Link Down
Login
Logout
Login NG
Roaming
Tunnel Start
Tunnel Stop
Application Login
Application Logout
Write Firmware
Write Config
Manual Reset
Auth Success
Auth Error
Figure 5.1. Simplified Log Display
54
Indicates that the AP has been activated.
Indicates that the wired link has been connected and the link speed.
Indicates that the wired link has been disconnected.
Indicates the MAC address of the wireless terminal connected to the AP.
Indicates the MAC address of the wireless terminal disconnected from the AP.
Indicates that the filter function rejected an attempt to log in by an unregistered wireless
terminal.
Indicates the MAC address of the wireless terminal roaming into the AP.
Indicates the MAC address of the wireless terminal that has started IP tunneling.
Indicates the MAC address of the wireless terminal that has terminated IP tunneling.
Indicates the IP address of the terminal that has used an application (such as TELNET and
FTP).
Indicates the termination of an application and the IP address of the terminal that used the
application.
Not available on this product.
Indicates that the Config file has been written.
Indicates that this product has been restarted using a web browser, TELNET, and other
methods.
Successful authentication
Authentication error
Description
NZ2WL - xxx