Mitsubishi NZ2WL-US User Manual page 65

Interfaces
■
- MTU
The maximum transmission unit (MTU) is the maximum length of data that can be transmitted in one
transmission. This displays the MTU for each interface.
- Transfer Speed
Displays the data transfer speed for each interface.
- MAC Address
Displays the MAC address for each interface.
- Interface / Link Status
Displays whether each interface is active and connected to the network.
- RX Octets
Displays the number of data bytes received by the access point.
- RX Unicast Packets
Unicast is the transmission of data to a specific destination in the network by specifying a single address.
This displays the number of unicast packets received by the access point.
- RX Broadcast Packets
Broadcast is the transmission of data to multiple unspecified destinations in the network. This displays
the number of broadcast packets received by the access point.
- RX Discards
When data is damaged for some reason, those data packets are discarded. This displays the number of
times data that have been discarded.
- RX Errors
Displays the number of errors that occurred when receiving data.
- RX Errors (CRC)
CRC (Cyclic Redundancy Check): Displays the number of errors detected during a CRC.
- TX Octets
Displays the number of data bytes transmitted by the access point.
- TX Unicast Packets
Displays the number of unicast packets transmitted by the access point.
- TX Broadcast Packets
Displays the number of broadcast packets transmitted by the access point.
- TX Wait Count
Displays the number of times waiting that occurred for data transmission when transmitting data.
- TX errors
Displays the number of errors that occurred when transmitting data.
- Reset Count
Displays the number of resets that occurred in an interface.
NZ2WL - xxx
5. Setup and Status Display
49