Status Display - Mitsubishi NZ2WL-US User Manual

5. Setup and Status Display

Status Display

A list of status information on this product can be displayed by selecting "Status" after logging in
through a web browser or TELNET.
This displays the following information.
Basic Informastion
■
- Loader Version
Displays the version of this product's loader.
- Firmware Version
Displays the version of this product's firmware.
- Hardware Version
Displays the version of this product's hardware (circuit board).
- Ethernet Address
Displays the wired LAN (Ethernet) MAC address of the access point.
- Wireless MAC Address
Displays the MAC address of the wireless LAN card.
- IP Address
Displays the IP address of the access point.
- Subnet Mask
Displays the subnet mask set for the access point. The subnet mask is the mask value used when
obtaining the network address of the subnet from the IP address. The subnet value can be obtained from
the logical OR of the mask value and the IP address.
- Default Gateway
The gateway is a device that provides a relay between different networks. This displays the IP address
of the standard connected gateway.
- Country Identification Code
Displays the country identification code of this product.
48
NZ2WL - xxx