Table of Contents
Advertisement
Electrical connections are located at the back of the appliance
Refer to Figs. 1A for wiring connection to the appliance.
Remember that an excess of cable length is required for the possible withdrawal of the cooker.
Always double check connections and ensure terminals are fully tightened and the cable is
secured to the cable clamp.
THE ISOLATOR SHOULD NOT BE POSITIONED IMMEDIATELY ABOVE THE COMPANION
COOKER, BUT MUST BE SITED WITHIN 2 METRES OF THE APPLIANCE.
The Companion requires a 30 amp power supply fitted in conjunction with a double pole isolator
with a minimum contact clearance of 3mm and be connected to the mains with a minimum 4mm
cable to comply with the latest editions of the local and national wiring regulations.
MINIMUM 4mm
2
AND MUST COMPLY WITH THE LATEST EDITIONS OF THE LOCAL
AND NATIONAL WIRING REGULATIONS
FIG. 1A
ELECTRICAL CONTROLS
6
REMOVE
COVER
SCREWS) TO GAIN ACCESS
TO THE MAINS TERMINAL
2
DESN 513370
(4
DESN 513372
Advertisement
Table of Contents
