Dvd Setup - Kenwood DDX6054 Instruction Manual

Gps navigation system and monitor with dvd receiver
Hide thumbs Also See for DDX6054:
Table of Contents

Advertisement

Setup Menu
3
Set a delay time
Make fine adjustment of the delay time of the
speaker output specified at <Setup the Car
Type> to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in
accordance with the farthest speaker.
76
DNX7240BT/DDX6054
+100cm
50cm
80cm
150cm
+70cm
+0cm

DVD Setup

You can set up the DVD play.
1
Display the DVD Setup screen
>
Touch [
]
[
2
Set each item
[Menu Language] Selects a disc menu
1
language.*
(See <DVD Language Setup>, page 77)
[Subtitle Language] Selects a subtitle
1
language.*
(See <DVD Language Setup>, page 77)
[Audio Language] Selects an audio
language.*
1
(See <DVD Language Setup>, page 77)
[Dynamic Range Control] Sets the dynamic
range.*
1
(
"Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
(
"ON")
>
]
[DVD SETUP]. (page 58)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dnx7240bt

Table of Contents