Controlling Tone-Based Services - Kenwood DDX6054 Instruction Manual

When a beep is heard, utter the name within 2
seconds.
When a beep is heard, utter the category within
2 seconds.
If there are more than one phone numbers
registered under the same name, go to step 4.
4 Select a Phone number category
Selects the Phone number category.
5 Make a call
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.

Controlling Tone-based Services

Uses tone base service using DTMF (Dual Tone
Multi Frequency).
1 Display the Talking screen
See <Calling by Entering a Phone Number>
(page 46).
2 Display the DTMF input screen
3 You can send tones during a call
47
English