What Do You Want To Do? DNX7310BT Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM/ MONITOR WITH DVD RECEIVER. DNX7310BTM In this manual, you will learn various convenient functions of the system. DNX5310BT DNX5310BTM Click the icon of the media you want to play.
Remote Controller Troubleshooting ontents Battery Installation __________________ 94 Problems And Solutions ______________ 98 Functions Of The Error Messages _____________________ 99 Before Use Bluetooth Control Remote Controller Buttons __________ 95 Resetting The Unit __________________ 101 Registering And Connecting How To Read This Manual Bluetooth Unit ____________________ 54 Appendix Basic Operations...
NOTE Introduces some tips, notes, etc. does not operate normally after a while, • If you use a remote controller, you can jump • Do not watch or fix your eyes on the unit’s directly to the desired track/ﬁle with entering the consult your Kenwood dealer. display when you are driving for any track/folder/ﬁle number, play time, etc. For details, Reference mark “Direct search mode” (p.81). extended period.
• Pressing for 1 second turns the power off. • When the power off, turns the power on. • Displays the Hands Free screen (P.54). • Pressing for 1 second displays the Screen Control screen. 0 (Eject) • Ejects the disc. NOTE • When the panel is opened, pressing closes the panel and pressing for 1 • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, second ejects the disc forcibly. they may be different from the actual panels. • When the panel is closed, pressing for 1 second fully opens the panel to • In this manual, each model name is abbreviated as follows. the location of the SD card slot. DNX7310BT and DNX7310BTM: DDX7031BT: Remote • Receives the remote control signal. If above icon is showed, read the article applicable to the unit you use. Sensor • You can enable or disable this feature by Remote Sensor (P.70). • If [Remote Sensor] is set to off, the remote control of TV reception is rejected. How To Insert An SD Card Disc insert A slot to insert a disc media. 1) Press < > button for 1 second.
Return to the Top page Return to the Top page Basic Operations Basic Operations DNX5310BT/DNX5310BTM Number Name Motion ﬁ (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.101). MENU • Displays the Top Menu screen (P.16). • Pressing for 1 second turns the power off. • When the power off, turns the power on. • Displays the navigation screen. • Pressing for 1 second switches AV out sources. • Displays the Hands Free screen (P.54). • Pressing for 1 second turns off the display. Volume Knob • Pressing switches attenuation of the volume on/off. • Turning adjusts volume up or down. • Pressing for 1 second displays Tone Control screen (P.89).* SCRN • Displays the Screen Control screen. • Pressing for 1 second displays rear view camera display. NOTE Remote • Receives the remote control signal. • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.
Return to the Top page Return to the Top page Basic Operations Basic Operations Initial setup urning On The Unit Perform this setup when you use this unit first time or when you reset the unit (P.101). The method of turning on is different depending on the model. Set each item as follows. Press the <MENU> button. Language Select the language used for the control screen and setting items. Default is “British English (en)” for models with region code 2/3/4 and “Chinese“ for model with region code 6. 1 Touch [SET]. 2 Touch  or  to select the desired language. 3 Touch [Enter]. The unit is turned on. For detailed operation, see Language setup (P.71).
Return to the Top page Return to the Top page Basic Operations Basic Operations Touch [Finish]. ● To eject the disc: ow To Play Media Press the <0> button. Music CD and disc media Press the <0> button. USB device Connect the USB device with the USB cable.
Return to the Top page Return to the Top page Basic Operations Basic Operations Attaching the front panel SD card etaching The Front Detach the panel as the diagrams Press the <0> button for 1 Hold the panel securely so as not Panel below.
Return to the Top page Return to the Top page Basic Operations Basic Operations ● Customizing Top Menu screen perating With The Top Menu Screen Drag the icon you want to register to the upper line. Most functions can be performed from the Top Menu screen. You can move up to three icons. Touch [Menu] on any screen. NOTE • If [Menu] is not displayed during video/picture playback, press the <MENU> button.
Return to the Top page Return to the Top page Basic Operations Basic Operations Flick scrolling ommon Operations You can scroll the list screen by flicking the screen up/down or right/left. Introduces the common operations. General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows. : Displays the EXT SW Control screen. : D isplays the SETUP Menu screen. : D isplays the Audio Control Menu screen.
Return to the Top page Return to the Top page Basic Operations Basic Operations Touch [ ] or [ ] in the navigation screen. avigation Operation For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen Press the <NAV> button. Touching this area displays the audio screen. : D isplays the navigation and control : D isplays the navigation and current keys of the current source.
Return to the Top page Return to the Top page DVD, VCD DVD, VCD 5 Sub function menu VD/Video CD (VCD) Operation The following functions can be performed by using keys in this area. • Repeats the current content: T ouch [ ]. Each time you touch the key, repeat mode switches in the DVD/VCD Basic Operation following sequence; DVD: "title repeat" , "chapter repeat" , "function off" Most functions can be controlled from the source control screen and playback screen. VCD (PBC On): Does not repeat VCD (PBC Off ): "track repeat" , "function off"...
Return to the Top page Return to the Top page DVD, VCD DVD, VCD Multi function menu Highlight control DVD Disc Menu Operation Highlight control lets you control the DVD You can set up some items in the DVD-VIDEO menu by touching the menu key directly on disc menu. the screen. The functions of each key are as follows. Touch illustrated area during Touch [Highlight] in the Menu Control playback.  [¢] screen.
Return to the Top page Return to the Top page DVD, VCD DVD, VCD Touch the key which corresponds to Menu/Subtitle/Audio Language* DVD Setup NOTE desired setting item. See Language setup (P.28). • For DVD, please refer to DVD Play Mode Setting You can set up the DVD playback functions. (P.25) to display the Zoom Control screen. Dynamic Range Control* Sets the dynamic range.
Return to the Top page Return to the Top page DVD, VCD DVD, VCD Language setup Parental level Disc setup This setting is for the language used in the Sets a parental level. You cannot setup this Performs setup when using disc media. menu, subtitle, and voice. You cannot setup item during DVD playback. Touch [SET] of [DISC SETUP]. these items during DVD playback. Touch [SET] of [Parental Level]. DISC SETUP screen appears. Touch [SET] of the desired Parental Pass screen appears.
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD Card CD, Disc, iPod, USB device, SD Card 4 Multi function menu D/Audio And Visual Files/iPod Operation Various functions can be performed by using keys in this area. For details on the menu, see Multi function menu (P.34). Music/Video/Picture Basic Operation 5 Sub function key Touch to display “Sub function menu” (7 in this table).
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD Card CD, Disc, iPod, USB device, SD Card USB device, iPod, and SD Card Picture/video screen NOTE • The screen shot below is for USB device. It may be different from the one for iPod. Simple Control screen List Control screen 9 Searching file area (picture/video file only) • Touch to search the next/previous file.
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD Card CD, Disc, iPod, USB device, SD Card Multi function menu Sub function menu Music CD Disc media Music CD Disc media iPod USB device and SD Card iPod USB device and SD Card The following functions can be performed by using keys in this area.
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD Card CD, Disc, iPod, USB device, SD Card Other search Category search (USB device, SD Card, and Link search (USB device, SD Card, and Search Operation iPod only) iPod only)
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD Card CD, Disc, iPod, USB device, SD Card Touch [ 3 ] on the selected artwork. Folder search (USB device, SD Card, Picture search (USB device and SD Card Search from album artwork and disc media only) only)
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD Card CD, Disc, iPod, USB device, SD Card Favorite list Touch the desired artwork in the Movie Control favorite list. You can create an original playlist of your favorite 10 albums by selecting album You can adjust the movie playback from a artworks. disc media.
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD Card CD, Disc, iPod, USB device, SD Card USB/SD setup iPod setup DivX setup USB/SD/iPod/DivX Setup You can perform setup when using USB/SD/ Set each item as follows. Set each item as follows. NOTE iPod/DivX.
Return to the Top page Return to the Top page Radio, TV Radio, TV 7 Sub function menu adio and TV Operation The following functions can be performed by using keys in this area. • Switches the band: Touch [AM] or [FM]. Radio Basic Operation • Tunes in a station: T ouch  [¡]. The method of frequency switching can be changed. See Multi function menu (P.45). Most functions can be controlled from the source control screen. The bar in center (tuner only) shows the current frequency location. 8 List switching key NOTE Touch to switch between the preset list and the information list.
Return to the Top page Return to the Top page Radio, TV Radio, TV TV Basic Operation TV screen Most functions can be controlled from the source control screen and TV screen. NOTE • Set the remote controller mode switch to TV mode before starting operation, see Switching the operation mode (P.95). • You can only operate TV with the optional accessory TV tuner KTC-V500N/PV300/N/P connected. • During playback, press the <MENU> button to display the source control screen. Simple Control screen List Control screen 6 Switching channel area Touch to switch the channel.
Return to the Top page Return to the Top page Radio, TV Radio, TV TV (For models with region code 2 or 3) EXT SW] Memory Operation Touch to control the external device power supply. For details, see External Device Control (P.81). Touch illustrated area during [ REAR playback to switch the band you want Auto memory to store in memory.
Return to the Top page Return to the Top page Radio, TV Radio, TV Manual memory Search by program type Traffic Information (FM tuner only) (FM Tuner Only) You can store the current receiving station or channel in memory. You can tune to a station with a specific You can listen and watch the traffic program type when listening to FM. Select a station or channel you wish information automatically when a traffic to store in memory.
Return to the Top page Return to the Top page Radio, TV Radio, TV Set each item as follows. Regional Tuner Setup TV Setup Sets whether to switch to the station only in the specific region using the “AF” control. You can set tuner related parameters. You can set the TV signal receiving areas. Default is “ON”. This function is available for models with Auto TP Seek NOTE region code 2 or 3. When traffic information station reception is • Each operation in this section can be started from Touch [ ] in the control screen.
Bluetooth Ver. 2.0 Certified above screen. Touch [BT SETUP]. Profile • Touch [Cancel] to cancel searching for the Cell-phone: Bluetooth unit. HFP (Hands Free Profile) NOTE • For the cell-phones verified for compatibility, access the following URL: http://www.kenwood.com/cs/ce/bt/. • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SETUP screen appears. Bluetooth SIG. See the following section for each setting. However, it may be impossible for such units to communicate with your cell-phone depending • Registering the Bluetooth Unit (P.55) on its type.
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Connecting the Bluetooth unit Registering special Bluetooth Playing Bluetooth Audio Device unit Touch [SET] of [Paired Device List]. Bluetooth basic operation If registering cannot be completed by normal Connection Device List screen appears. operation, there is another method.
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Making a call Select a dialing method. *1 Y ou can sort the list to begin with touched Using Hands-Free Unit character. You can use telephone function by Press the <TEL> button. connecting the Bluetooth telephone to this unit. Downloading the phonebook If you want to use your phonebook data, it is necessary to download the data from the cell-phone to this unit in advance.
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Receiving a call Operations during a call Call waiting Bluetooth Setup If you receive a call during another call, you Adjust the receiver volume can answer it with the current call suspended You can register PIN code, select the device Touch [ ] to answer a phone call or or switch between the current call and to connect, and perform output setup.
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Registering Bluetooth unit PIN Setting up the Hands-Free SMS Use Hands-Free Control code phone Select whether to use SMS. You can perform various setup about hands- ON (Default): Uses SMS. You can set the PIN code to the Bluetooth free function. OFF: Not uses SMS. Touch [TEL SETUP] in the Hands Free unit. The code is acquired when registering screen.
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation SMS (Short Message Service) Operations in the message list screen Creating a new message Changes the layout of the character keys [ABC]: Alphabetical layout Touch [Create Message] in the SMS You can use SMS function.
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Using templates Touch desired key and enter the number you want to register. You can create a message easily by selecting the desired sentence from the template list. Touch [Create Message] in the SMS Select screen. SMS Create Menu screen appears. Touch [Template].
Return to the Top page Return to the Top page Setting Up Setting Up System Setup etting Up Bright/Tint/Color/Contrast/Black/ Monitor Screen Setup NOTE Sharpness • Each operation in this section can be started from Adjusts each item. You can adjust image quality in iPod video, the multi function menu. picture file, menu screen, etc. Dimmer Touch [Menu] on any screen. Select dimmer mode. Press the button instructed in each TOP Menu screen appears.
Remote Sensor* Advanced: A llows you to select languages for this operation. Displays the vehicle information. respective items.* Selects a remote control signal. Default is “ON”. This function requires a commercial adaptor. Language Select Language Touch the function you want to set. Consult your Kenwood dealer for details. Selects a language. Select the language used for the control Steering Remote Controller screen and setting items. See Language setup Sets the desired function in the steering remote * I f you select [Advanced] for Select Mode, (P.71). controller. See Learning function of steering the following screen appears. Text Scroll remote (P.71).
Return to the Top page Return to the Top page Setting Up Setting Up Travel Prayer for Safe Drive Setting Touch panel adjustment EXT SW setup NOTE (DNX7310BTM/ DNX5310BTM only) • If “SI” is turned on, the SI indicator on the sub Set up the external switch power mode. When this function is set, the prayer for Touch [Touch] in the System Menu panel flashes when the vehicle ignition is off and driving safety is displayed when the unit is screen.
Return to the Top page Return to the Top page Setting Up Setting Up Setup memory Follow the instruction on the screen. Monitor angle control Display Setup Audio Control, AV-IN SETUP, Camera, and Touch [Menu] on any screen. Audio SETUP settings can be memorized. The You can adjust the position of the monitor. memorized settings can be recalled at any Touch [SETUP]. Touch [Angle] in the Display Menu time. For example, even when the settings SETUP Menu screen appears.
Return to the Top page Return to the Top page Setting Up Setting Up Panel color coordinate Registering original color Changing background image Touch [Enter]. You can register your original color. You can set the screen and button You can load an image from the connected Touch [Adjust] in the Panel Color illumination color. USB device and set it for the background Coordinate screen. image. The selectable items differ depending on the Panel Color RGB Coordinate screen unit.
Return to the Top page Return to the Top page Setting Up Setting Up NAV Interrupt Speaker Rear Camera* Navigation Setup Camera Setup Selects speakers used for voice guidance of the Selects the type of rear camera to use. navigation system. You can set camera parameters. CMOS-3xx: W hen the CMOS-300 series with ID Front L: U ses the front left side speaker for 1 set is connected. You can set navigation parameters. Touch [Menu] on any screen. voice guidance.
Return to the Top page Return to the Top page Setting Up Setting Up Software Information AV Input Setup AV Output Interface Setup External Device Control Check the software version of this unit. You can set AV input parameters. You can select an AV source to be output at the AV OUTPUT port. Default is “VIDEO1”. Control the external device power supply. Touch [Menu] on any screen. Touch [Menu] on any screen. Touch [Menu] on any screen.
OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10 Setting Audio Rear Touch [Audio SETUP]. None, OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10 Subwoofer None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over When Speaker network is set to 3 way Touch the speaker you wish to adjust (DNX7310BT/ DDX7031BT): and set each item as follows. Tweeter Small, Middle, Large Mid Range OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm, Audio SETUP screen appears. 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10 Woofer None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over NOTE • For how to switch to the 3-way speaker system,...
Return to the Top page Audio Setting Up Audio Setting Up Crossover network setup When Speaker network is set to 3 way Car type setup Speaker location setup (DNX7310BT/ DDX7031BT): You can set a crossover frequency of In the Car Type screen, touch speakers. [Location]. You can setup the car type and speaker Touch the speaker to set the crossover Speaker Location screen appears.
Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up DSP select Elevation Loudness Controlling General Audio Turns the loudness control function on or You can select whether using DSP (Digital You can raise the sound position heard from Touch [Audio Control]. off. If turned on, high and low tones are Signal Processor) System. the speakers virtually. automatically enhanced during low volume. Settable only when zone function (P.90) is Touch [Bypass] or [Through] of [DSP Touch [Elevation] in the Audio SETUP set to off.
Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Controlling equalizer manually Highway sound setting Controlling equalizer manually Equalizer Control This setting cannot be performed when you You can boost a certain range of sound that Touch [Tone] in the Equalizer screen. select [iPod] in the Equalizer screen. becomes hard to hear due to road noise. You can adjust equalizer by selecting the Set each item as follows. optimized setting for each category.
Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Zone Control NOTE • When the rear speaker sound is switched, the You can select different sources for both audio source that is output at the AV OUTPUT front and rear positions in the vehicle. terminal is also switched to the same source. • When the dual zone function is set to on, the Touch [Zone Control]. following functions are not available. • Output from the subwoofer • Subwoofer Level/Bass Boost (P.87) • Equalizer Control/Space Enhancer /Listening Position (P.88, 90, 92) • DSP Bypass Control /Speaker Setup/Car Type Setup...
Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Position DTA Control Listening Position NOTE • Make fine adjustment of the delay time of the You can fine-adjust your listening position. speaker output specified here to have a more suitable environment for your vehicle. In Position screen, touch [Adjust]. You can adjust the sound effects according • If you specify the distance from the center of the to your listening position. Select the speaker you wish to adjust currently set listening position to every speaker, by touching speaker icon.
Return to the Top page Return to the Top page Remote Controller Operation Remote Controller Operation Functions Of The Remote Controller Buttons emote Controller Switching the operation mode Direct search mode This unit can be operated using the remote controller. The remote controller is supplied with the unit. The functions operated from the remote Using the remote controller, you can jump controller differ depending on the position directly to the desired file, track chapter, etc. 2CAUTION of the mode switch. with entering the number corresponding to • Put the remote controller in a place where it will not move during braking or other operations.
Return to the Top page Return to the Top page Remote Controller Operation Remote Controller Operation Location of Function Name the mode switch ROUTE M AUD, TV Screen mode changes each time you press this key during video playback. Returns to the DVD top menu. Displays Route Option menu. VOICE AUD, TV Switches navigation display on/off. Displays the DVD menu. Turns the playback control on or off while playing VCD. Speaks the voice guidance. 10 VIEW AUD, DVD, TV Switches the AV source to be output. Switches between 2D and 3D map displays. 11 MAP DIR AUD, DVD, TV Switches the display angle each time it is pressed.
• Cannot set up the high pass filter. protection circuit is activated and • Cannot select the output The dual zone function Set the dual zone function to on. you may not be able to operate destination of the subsource in is disabled. See Zone Control (P.90). the unit. the dual zone. Mecha Error The disc player is malfunctioning. Eject the disc and try inserting it again. Contact • Cannot adjust the volume of the the Kenwood dealer if this indicator continues rear speakers. blinking or the disc cannot be ejected. • Cannot set up the equalizer. The dual zone function Set the dual zone function to off. Disc Error An unplayable disc is inserted. Change the disc. • Cannot set up the crossover is enabled. See Zone Control (P.90). See Playable Media And Files (P.102). network. “DSP Select” is set to Set “DSP Select” to “Through”.
Return to the Top page Return to the Top page Troubleshooting Troubleshooting Error Message Cause Solution Resetting The Unit USB Device The connected USB device is rated Check the USB device. Some trouble may have Error!! a current capacity higher than the occurred to the connected USB device. If the unit or the connected unit fails to operate properly, reset the unit. allowable limit. Change the source to any source other than Press the <Reset> button. USB. Remove the USB device. The unit returns to factory settings. Authorization Connection to the iPod has failed.
¡% • Although the audio files are complied with CD-EXTRA Only music CD session can be played. the standards listed above, the play may be ‡ HDCD impossible depending on the types or conditions ¡P of media or device. CCCD × • An online manual about audio files is put on the Others Dualdisc × site, www.kenwood.com/cs/ce/audiofile/. Super audio CD Only CD layer can be played. On this online manual, detailed information and notes which are not written in this manual are *1 Incompatible with 8 cm (3 inch) discs. provided. Make sure to read through the online ‡ : Playback is possible. manual as well. % : Playback is partly possible. × : Playback is impossible. NOTE • When buying DRM enabled contents, check the Registration Code in the DivX setup (P.43). Each time a file with the displayed code is played and protected against copying, the code changes. • DivX can be played only from a DVD disc media.
• iPhone 3G The loudness control function is on. Identifies the stereo audio output of channel Normal playback is not guaranteed when a cable • iPhone 1 or 2. other than the USB compatible cable is used. ■ DVD/CD NOTE Usable SD card Identifies the left audio output. FO-REP • For the conformity information on iPod/iPhone software, Folder repeat function is on. The unit is capable of playback of SD/SDHC Identifies the monaural audio output. access www.kenwood.com/cs/ce/ipod/. memory cards complying with the SD or • By connecting your iPod/iPhone to this unit with A disc is inserted. SDHC standard. Identifies the right audio output. an optional accessory iPod connection cable • White: A Disc is inside the unit. A special adapter is required to use a miniSD (KCA-iP202/KCA-iP22F), you can supply power STEREO • Orange: Error at the disc player card, miniSDHC card, microSD card or to your iPod/iPhone as well as charge it while Identifies the stereo audio output. VIDEO playing music. However, the power of this unit microSDHC card.
Return to the Top page Return to the Top page Appendix Appendix ■ USB RDS* Region Codes In The World Indicates the state of the Radio Data System FO-REP station when the AF function is on. The DVD players are given a region code according to the country or area it is marketed, as The folder repeat function is on. • White: Radio Data System is being received. shown in the following map. VIDEO • Orange: Radio Data System is not being Identifies the video file. received. MUSIC Identifies the music file. A stereo broadcast is being received. PICTURE Identifies the picture file. Indicates the reception state of traffic information. The random function is on. • White: TP is being received. • Orange: TP is not being received.
Disc Format ■ Monitor section Code Language Code Language Code Language : DVD-Video/ VIDEO-CD/ CD-DA Afar Interlingua Kirundi Picture Size Sampling Frequency Abkhazian Interlingue Romanian DNX7310BT, DNX7310BTM, DDX7031BT : 44.1/48/96 kHz Afrikaans Inupiak Russian : 6.95 inches (diagonal) wide Quantifying Bit Number : 156.6 mm (W) x 81.6 mm (H) Amharic Indonesian Kinyarwanda : 16/20/24 bit Arabic Icelandic Sanskrit DNX5310BT, DNX5310BTM : 6.1 inches (diagonal) wide...
Selectivity (± 400 kHz) Middle: 1kHz ± 10dB • AVRCP (Audio/Video Remote Control Profile) : ≥ 80 dB Treble: 10kHz ± 10dB NOTE • OPP (Object Push Profile) Stereo Separation • PBAP (Phonebook Access Profile) • Although the effective pixels for the liquid crystal ■ External SW (DNX7310BT, : 35 dB (1 kHz) • Multi Profile support panel is given as 99.99% or more, 0.01% of pixels DNX7310BTM, DDX7031BT) Region code 4 model: 40 dB (1 kHz) may not light or may light incorrectly. DNX5310BT, DNX5310BTM Maximum Power Supply Current • HFP (Hands Free Profile) ■ AM tuner section Specifications subject to change without notice.
About This Unit created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays CLASS 1 ■ Copyrights DivX video. Visit divx.com for more information and LASER PRODUCT software tools to convert your files into DivX videos. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks • ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® by JVC KENWOOD Corporation is under license. device must be registered in order to play purchased Declaration of Conformity with regard to the EMC The label is attached to the chassis/case and says Other trademarks and trade names are those of their DivX Video-on-Demand (VOD) movies. To obtain your Directive 2004/108/EC that the component uses laser beams that have been respective owners. registration code, locate the DivX VOD section in your classified as Class 1. It means that the unit is utilizing Declaration of Conformity with regard to the laser beams that are of a weaker class. There is no...