Table of Contents
Advertisement
[Phase] Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to "Reverse".
Sets the sub woofer phase.
(DNX7240BT: Only when "Subwoofer" is set to
"ON" in Audio Setup)
(DDX6054: Only when "Subwoofer" is set to
"ON" in Audio Setup and "LPF FREQ" is set to
other than "Through")
[HPF FREQ] High Pass Filter adjustment.
(When front speaker or rear speaker is selected
on Speaker Select screen)
[LPF FREQ] Low Pass Filter adjustment. (When
Subwoofer is selected on Speaker Select
screen)
[Slope] Sets a crossover slope. (DNX7240BT
only)
Car Type (DTA) Setup (DNX7240BT)
You can setup the car type and speaker network,
etc.
1
Display the Car Type Setup screen
>
Touch [
]
[
]
Type]. (page 58)
2
Setup the Car Type
If your car type is selected, the Digital Time
Alignment and Equalizer is set automatically (for
timing adjustment of sound output for each
channel) to have the highest surround effects.
1 Sets up the car type you use together with
this unit.
You can choose according to type of your car.
"OFF", "Compact", "Sedan", "Wagon", "Minivan",
"SUV", "Passenger van"
[Location] Sets the locations of the speakers.
[Adjust] Displays the Car Type Adjust screen.
You can adjust the digital time alignment that
was set automatically when you selected the
car type.
>
>
[Audio SETUP]
[Car
1
1
1
Speaker Location setup
1
Display the Speaker Location Setup screen
2
Set the speaker locations
[Front Speaker] Sets the location of the front
speaker.
"Door", "On Dash", "Under Dash"
[Rear Speaker] Sets the location of the rear
speaker.
"Door", "Rear Deck"
"2nd Row", "3rd Row" (Minivan, Passenger van)
Car Type Adjust
You can manually set the sound output timing of
each channel.
1
Display the Car Type Adjust screen
2
Select a speaker you wish to adjust
1
1
1
2
2
2
3
3
3
Front speaker
1
2
Rear speaker
Subwoofer
3
Next page 3
75
English
Advertisement
Chapters
Table of Contents
