Dvd Setup - Kenwood DNX9960 Instruction Manual

Setup Menu

DVD Setup

You can set up the DVD play.
1 Display the DVD Setup screen
> >
Touch [ ] [
(page 78)
2 Set each item
[Menu Language]*
menu language. See <DVD Language
Setup> (page 99).
[Subtitle Language]*
language. See <DVD Language Setup>
(page 99).
[Audio Language]*
language. See <DVD Language Setup>
(page 99).
[Dynamic Range Control]*
dynamic range. (
The dynamic range is reduced by
changing from "Wide" to "Normal"
and from "Normal" to "Dialog". "Dialog"
makes the total sound volume becomes
larger as compared with "Wide" and
"Normal", allowing you to listen to the
movie's dialog more clearly.
This is effective only when you are using
a Dolby Digital software.
98 DNX series DNX9960/ DNX7160/ DNX7020EX
> >
] [DVD SETUP].
1 Selects a disc
1
Selects a subtitle
1
Selects an audio
1 Sets the
"Dialog")
The operation is available during the
play stop mode.
[Angle Mark] Sets an angle mark
display. ( "ON")
[Screen Ratio]* 1 Selects the screen
display mode. (
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the
Letter Box format (having black stripes
at the top and bottom of screen).
"4:3 PS": Displays wide pictures in the
Pan & Scan format (showing pictures
cut at the right and left ends).
1
[Parental Level]*
Lock screen. ( "OFF")
See <DVD Parental Level Setup> (page
99).
[Disc SETUP] Makes the settings related
to the disc media. See <Disc Setup>
(page 100).
[Stream Information] Displays the
present source information.
The stream (Dolby Digital, dts, Linear
PCM, MPEG, MP3, WMA or AAC) is
displayed. (DNX7 series only)
⁄
• * Disabled when a DVD is being played.
"16:9")
Displays the Parental