Plc Setting For Ethernet; Plc Setting For Serial - Toshiba T-PSV Operation Manual

4. Configuration File

4.2.3 PLC setting for Ethernet

This is the PLC setting for Ethernet. It specifies the PLC name, IP address and port number of
the PLC, and the PLC model.
The setting details and the column order is as follows.
Setting ID
PLC name
IP address
Port number
PLC model

4.2.4 PLC setting for Serial

This is the PLC setting for serial connection. It specifies the PLC name, PLC station address,
and PLC model.
The setting details and the column order is as follows.
Setting ID
PLC name
Station address
PLC model
Programmer port
Note) When the programmer port is used, only one PLC can be connected on the serial line.
In this case, set the station address as 1 except T1/T1S. In case of T1/T1S, the
programmer port station address is user setting. Refer to T1/T1S User's Manual.
20
DDE Server T-PSV
PE
Any name (within 15 characters)
IP address of the remote PLC
Port number of the remote PLC
T2N, T3H, S2T, S2, or S3
PS
Any name (within 15 characters)
1 to 32
(If TOSLINE-S20 is used, it is 1 to 64)
T1, T1S, T2, T2E, T2N, T3, T3H, S2T, S2, or S3
Yes or No
(If programmer port is used, set Yes)