Table of Contents
Advertisement
(3) Programmer port connection
The programmer port connection is available with T1, T1S, T2E, T2N, T3, T3H, and S2T.
The interface of the PLC's programmer port is RS232C.
Only one PLC can be connected to the T-PSV. The transmission speed is fixed at 9.6kbps.
In this configuration, personal computer's Serial port is used.
T-PSV
(4) TOSLINE-S20 connection
The TOSLINE-S20 connection is available with T2E, T2N, T3, T3H and S2T. These PLCs
support TOSLINE-S20 connection.
Up to 64 PLCs can be connected to the T-PSV via TOSLINE-S20. The transmission speed
is fixed at 9.6kbps. In this configuration, personal computer's Serial port is used to connect
with the loader port of the TOSLINE-S20 station.
T-PSV
Note) TOSLINE-S20 is a Toshiba's high-speed control data network. Three types of
network configuration are available, co-axial bus, optical bus, and optical loop. The
transmission speed is 2Mbps. For details of the TOSLINE-S20, refer to the separate
TOSLINE-S20 manual.
RS232C
RS232C
Loader port of the
TOSLINE-S20 station
T3 / T3H
OR
T2E / T2N / S2T
T3 / T3H
T2E / T2N / S2T
OR
TOSLINE-S20
T2E / T2N / S2T
(max. 64 PLCs)
Operation Manual
1. Overview
T1 / T1S
(only 1 PLC)
5
Advertisement
Table of Contents
