Adding Another Camera: Working With Iphone®/Ipad; Help - Motorola BLINK1 User Manual

• Tap on Edit:
• Tap Remove to take a camera off the list.
• Tap Rename to give a camera a new name.
• Tap Alert Settings to receive notifications if a noise is
detected or the temperature in your baby's room is too high
or too low.
• If you use Alert Settings, under Settings on your iPhone®/
iPad®, select Notifications > Baby Cam > Notification
Centre ON.
• Select your preferred Alert Style and return to the application
and tap Done.
• Tap Cancel to return to the camera list.
• Tap on Account to change the password.
• Tap on Logout to leave the account.
Adding another Camera: Working with iPhone®/iPad®
30 30
BLINK1_EU_A6_v9_2012_12_24.indd 30-31
4.8 Adding another Camera:
Working with iPhone®/iPad®
Follow the same steps as under 3.3 User Account and Camera
Setup, Working with iPhone®/iPad®.

5. Help

Noise interference
To avoid background noise or echoes, ensure, that there is
enough distance between your device and the Wi-Fi® Camera
Unit.
Use of other 2.4 GHz products, such as Bluetooth systems or
microwave ovens, may cause interference with this product.
Keep the Wi-Fi® Camera Unit at least 5ft away from these
types of products, or turn them off if they appear to be causing
interference.
Lost connection
Check your Wi-Fi settings. If necessary reconnect your Wi-Fi.
Ensure the Wi-Fi® Camera Unit is switched ON. Wait a few
minutes to make the connection with the Wi-Fi system.
If you forgot your password
If you do not remember your password, tap Forgot password
and submit your e-mail address. A new password will be sent to
your e-mail address immediately.
Help 31 31
24/12/2012 11:19 AM