Getting Started - Connecting Devices; Procedure For Resetting The Camera; User Account And Camera Setup; Working With Devices For Android - Motorola BLINK1 User Manual

3. Getting started - Connecting Devices

Connect the Camera to the power adapter and plug it into a
suitable mains power socket. The Camera must be within range
of the Wi-Fi® router with which you want it to link.

3.1 Procedure for resetting the Camera:

Note: If your camera is moved from one router (e.g. home) to
another router (e.g. office), then this camera must be reset
again, and then the camera set up again for devices for
Android™ or iPhone®/iPad®.
1. Switch the ON/OFF switch to OFF.
2. Press and hold the RESET button on the underside of
the camera.
3. Switch the ON/OFF switch to ON.
4. Keep pressing the RESET button until you hear a beep
sound.
5. Release the RESET button and wait for the camera to
complete the internal reset procedure.
6. After about 60 seconds you will hear two short beeps and
the green LED starts blinking.
• Please be patient, it may take a few minutes until your camera
appears in your Wi-Fi® devices list, or is added to your account.
• Once the camera has been added, the camera view will be
displayed automatically.
Status of LED Indication:
- Reset / Setup state: fast blinking
- Unconnect state: slow blinking
- Connect state: always on
8 8
BLINK1_EU_A6_v9_2012_12_24.indd 8-9

3.2 User Account and Camera Setup:

Working with devices for Android™

• Download and install the application "Monitor Everywhere"
from the Google Play™ Store. Note: If you can't find the
application, then use your device browser to go to
www.monitoreverywhere.com for advice on how to install.
• Turn on the Wi-Fi® of your device for Android™ and select
your wireless network.
• Switch on the camera (see 3.1 Procedure for resetting the
Camera).
• Run the "Monitor Everywhere" application. After initialisation,
the Baby Monitor Setup wizard appears.
• Select CREATE ACCOUNT.
• Select GET STARTED.
• Follow the on-screen instructions and select the camera
and the Wi-Fi® connection that your camera can use. If
necessary enter a password.
• Tap CONNECT TO Wi-Fi.
Getting started Getting started: Working with devices for Android™ 9 9
24/12/2012 11:19 AM