Motorola BLINK1 User Manual page 6

• Tap NEXT STEP.
• Select CREATE ACCOUNT.
• Enter a user name, a password and an e-mail address.
• Agree with the terms of use and select SIGN UP.
• Tap NEXT STEP.
Getting started: Working with devices for Android™
10 10
BLINK1_EU_A6_v9_2012_12_24.indd 10-11
• Follow the on screen checklist to ensure that your camera
is power connected and tap NEXT.
• Select the camera from the list.
If you cannot find the camera ID on the list, please reset the
camera with the following procedure:
1. Switch the ON/OFF switch to OFF.
2. Press and hold the RESET button on the underside of
the camera.
3. Switch the ON/OFF switch to ON.
4. Keep pressing the RESET button until you hear a beep
sound.
5. Release the RESET button and wait for the camera to
complete the internal reset procedure.
6. After about 60 seconds you will hear two short beeps and
the green LED starts blinking.
• Wait for up to five minutes. Should the connection process
take longer, tap CANCEL and try again.
• Ensure that you have a good Wi-Fi network connection.
Getting started: Working with devices for Android™ 11 11
24/12/2012 11:19 AM