Satellite Receiver Control Settings - JVC HR-S6855EK Instructions Manual

45
advanced features
Satellite Receiver
Control Settings
The following procedure is required if you receive satellite channels through
a satellite receiver. Around 20 seconds before the VIDEO Plus+ timer record-
ing or Manual timer recording starts, the VCR sets its input mode to L-2 and
automatically switches the satellite receiver's channels using the provided
Satellite Controller.
Installing Satellite Controller
situate satellite controller Place
Satellite Receiver
the Satellite Controller so that the path
between its transmitter and the satellite
receiver's remote sensor is unobstructed.
attach satellite controller Fix
securely using the adhesive strip at-
tached on the back of the Satellite
Controller.
Satellite Controller
Your VCR
(suggested locations)
connect up Be sure to connect the
recorder's
AV2 (L-2) IN/DECODER
Transmitter
connector to the satellite receiver's 21-
Satellite Controller
pin SCART connector.
note When connecting your satellite
Satellite Receiver
receiver, refer to its instruction manual.
DECODER VCR TV
connect satellite controller to
vcr Connect the Satellite Controller to
the connector on the rear
SAT CONTROL
panel.
Your VCR