When Programmes Overlap Each Other - JVC HR-S6855EK Instructions Manual

30
basic features

When Programmes Overlap Each Other

If
PROGRAM OVERLAPPED
programme you have just made.
confirm overlapping programmes The
Program Check screen appears and conflicting
programmes will start blinking.
Example: Programme 1 (you have just made) and
Programme 4 overlap each other.
select programme to modify Press the A
and B buttons, then press
can only select one of the overlapping programmes.
If you do not mind this overlap, press
note
programme setting. The programme with the lower programme number will be
recorded and the other one will not be recorded correctly. Without doing
anything for about 1 minutes, the VCR will finish the timer programming.
cancel a programme
programme when the Program screen you do not
want is shown.
change a programme
, ,
STOP +/– DATE +/– PR +/–
buttons as necessary, then press
PROGRAM COMPLETED
about 5 seconds, then normal screen appears.
If the overlap is not yet solved or another overlap occurs with the timer
note
programme setting made last after making correction on a programme, the
conflicting programmes will be shown on the Program Check screen again.
Repeat the above steps again until the overlap is solved.
appears, you have another programme overlapping the
(or E). You
O
PROG
Press x to cancel a
Use the ,
START +/–
, / and
PDC
.
O
appears on the screen for
STOP CH
START
1 8:00 10:00 3
2 10:00 10:45 2
13:00 1
3 11:30
4 9:00 10:00 92
5
6
7
8
[1] a k
[PROG]: EXIT
to finish the timer
– P1 –
START STOP
8:00 10:00
SP VPS/PDC OFF
DATE TV PROG
24.12 3
ITV
[x]: DELETE [+/–] a k
[PROG]: EXIT
DATE
24.12
25.12
25.12
DAILY