Guide Program Numbers - JVC HR-S6855EK Instructions Manual

Guide Program Numbers

Guide Program Numbers are used by the VIDEO Plus+ system to identify the correct preset
to record. You should only need to perform this function if:
• using a PlusCode number does not identify a preset number automatically
• you add a channel after Auto Setup or Preset Download has been performed
• you wish to use the VIDEO Plus+ system to record a satellite programme
Manually Setting Guide Program Numbers
get to the guide prog set screen
the A and B buttons and press O (or E). Move the highlight bar to
using the A and B buttons and press O (or E).
SET
enter guide prog number
Program number for the TV station shown then press O (or E).
enter receiving preset number
'0') to select TV PROG or
to enter the receiving preset number that the VCR or satellite
receiver uses to receive the TV station then press O (or E).
satellite receiver users
programme with the VIDEO Plus+ system, you need to install
the provided Satellite Controller and perform the procedure
described in '
Satellite Receiver Control Settings
return to normal screen
Press m. Move the highlight bar to
Use the A and B buttons to enter the correct Guide
Press
AUX
SAT . Use the A and B buttons
To timer-record a satellite
' (
Press m.
advanced features
(number key
pg. 45).
using
INITIAL SET
GUIDE PROG
GUIDE PROG SET
GUIDE PROG TV PROG
4 4
F
CH4
[1] a k [0]: SAT
[MENU]: EXIT
67