Satellite Receiver Control Settings - JVC HR-V705EK Instructions Manual

36 advanced features
Satellite Receiver
Control Settings
The following procedure is required if you receive satellite channels through
a satellite receiver. Around 20 seconds before the VIDEO Plus+ timer record-
ing or Manual timer recording starts, the VCR sets its input mode to L-2 and
automatically switches the satellite receiver's channels using an optional
Satellite Controller.
Installing Satellite Controller
situate satellite controller Place
the Satellite Controller so that the path
between its transmitter and the satellite
receiver's remote sensor is unobstructed.
attach satellite controller Fix
securely using the adhesive strip at-
tached on the back of the Satellite
Controller.
connect up Be sure to connect the
recorder's
L-2 IN/DECODER
the satellite receiver's 21-pin SCART
connector.
note When connecting your satellite
receiver, refer to its instruction manual.
connect satellite controller to
vcr Connect the Satellite Controller to
the connector on the rear
SAT CONTROL
panel.
Your VCR
connector to
Satellite Receiver
DECODER
Your VCR
*DECODER function is not available in the UK.
Satellite Receiver
Satellite Controller
(not provided)
(suggested locations)
Transmitter
Satellite Controller
(not provided)
VCR TV
CONTROLEUR SAT
SAT CONTROL
ENTREE/DECODEUR ENTREE/SORTIE
L-2 L-1
IN/DECODER IN/OUT
AUDIO
010
ENTREE
ANT. IN
SORTIE
OUT
ANTENNE
R
SORTIE
RF OUT
L