Express Timer Programming - JVC HR-S6855EK Instructions Manual

28
basic features
before you start
Set the tape speed
Make sure that the
VCR's clock is set
correctly
Insert a cassette with
the safety tab in place
24H Express Timer
Programming
You can programme a timer recording that starts within 24 hours using the
24H EXPRESS c button and the Advanced JOG Dial on the VCR.
enter programme mode
c button on the VCR. The
EXPRESS
Programme Start Time indicator starts
blinking on the display panel.
Turn the
set start time
right or left. One click stop of the
changes the time in 5-minute intervals.
Push the center part of
set stop time
the . The Programme Stop Time
JOG Dial
indicator starts blinking on the display
panel. Turn the
JOG Dial
set preset position
part of the . Turn the
JOG Dial
the right or left.
engage timer mode
turns off automatically and c is displayed on the display panel.
• Before pressing the
24H EXPRESS
can cancel the setting at any time by pressing the center part of the
for more than 3 seconds or pressing x on the Remote Control. Repeat the
above steps from setting the start time.
• To disengage the Timer Mode, press c or
Notes
• You can set this VCR to timer record up to eight programmes. If you try enter a
ninth, appears on the display panel.
FULL
• If appears on the display panel, repeat the above steps again.
Err
• When a menu screen is shown, you cannot use the 24H Express Timer Pro-
gramming function. Press
• You can use the 24H Express Timer Programming function also when the VCR
is turned off.
• For the 24H Express Timer Programming function, the programme overlap
warning display does not appear even if some programmes overlap each other.
Press the
24H
to the
JOG Dial
JOG Dial
to the right or left.
Push the center
to
JOG Dial
Press the
24H EXPRESS
c button to engage the timer mode, you
24H EXPRESS
to return to normal screen, and try again.
m
SP
SP
SP
SP
c button on the VCR. The VCR
JOG Dial
c.