Tuner Set; Auto Channel Setup - JVC HR-S6855EK Instructions Manual

60
advanced features

Tuner Set

The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the A or B buttons enables you
to jump to the available channels without going via any vacant channels. This channel
search can be done either automatically or manually. You should only need to perform
either of the following procedures if Auto Setup or Preset Download has failed to identify
and record available channels or you have moved to a new area.

Auto Channel Setup

get to the main menu
perform auto channel set
using the A and B buttons and press O (or E) twice.
SET
rf and scart connection
VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the
there for about 4–12 minutes while the VCR searches for receivable
[MENU]:EXIT
= Preset Number,
of the TV stations that the process has found. The first station will
have a highlight bar over it and will be blinking. This screen and
the programme currently being broadcast on the selected station
will alternate at 8 second intervals. To view the next channel, press
the A and B buttons to move the highlight bar to the
required channel.
return to normal screen
NOTES ON CHANNEL RECEPTION
incorrect station id
correctly by the VCR and Auto Guide Program Number Set may not work properly. If the Guide
Program Numbers are not set, entering a PlusCode number, may result in an incorrect channel
being recorded.
poor reception
quality is poor, you can delete that station from the memory (see page 62).
Press m.
Move the highlight bar to
If you have chosen to connect the
screen will appear on the TV and remains
AUTO SET
stations. During Auto Channel Set the S mark on the screen moves
from left to right.
AUTO SET
The caption
PLEASE WAIT
about 5 seconds.
confirmation screen
Auto Channel Set has completed
its search, the confirmation screen
will appear showing the details (
= Channel Number and
CH
Press m.
In certain reception conditions, station names may not be stored
The VCR memorises all stations found regardless of their quality. If a station's
AUTO CH
appears at the end of the process for
SCAN COMPLETED
Once
PR
= Station Name)
ID
MAIN MENU
PROGRAMME NAVIGATION
MODE SET
F
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
[1] a k
[MENU]: EXIT
PR CH ID PR CH ID
01 26 BBC1 08 - - - -
02 33 BBC2 09 - - - -
03 23 ITV 10 - - - -
04 30 CH4 11 - - - -
05 37 CH5 12 - - - -
06 - - - - 13 - - - -
07 - - - - 14 - - - -
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT