Power Off - JVC VR-609 Instructions Manual

!
・The playback speed may not be the consistent with the record speed.
・A motion may become unnatural at the time of playback.
・During replay external IEEE1394 HDD, screen should wave because of data
transfer speed.
・If DVR has HDD impact or other damage during replay, screen could be stopped
in a moment or different channel could be displayed.
■ Jog & Shuttle motion
・Turn the shuttle dial in the left/right directions to perform high-speed search.
・Turn the jog dial during playback/reverse playback to switch to slow motion playback.
・ Possible to reproduce each frame by using Jog from the pause screen.
■ Motion by Mix Button
If you press the Display button and Mode button (Image Sequence, Triplex) during
the play mode, the screen format is displayed with Multi/Image Sequence/Triplex.
1) Switching Display: Enables 1/4/9 screen display of the recording channel.
2) IMAGE SEQUENCE : Multiple images from a single camera are displayed in
3) TRIPLEX
!
The number of screens displayed during playback is dependent on the number of
screens for the live image display. When live image is displayed in 6/7 screens or a
user-specified screen, however, these will be displayed in 9 screens.

5.10 Power Off

・Press front operate button to power off this unit.
If system is to not be used for long periods of time, turn off the rear panel power
!
switch.
order in which they were recorded in a 9 image screen format.
: Possible to view playback while monitoring.
-- 90 --
VR-609