Video Output - JVC VR-609 Instructions Manual

5.7.6 Video Output

・Choose the kind of Spot Output.
・Monitor Out : Spot Output is the same as the Monitor Out.
・Input Channel : the selected channel is displayed.
・Auto Select : Choose channels to display. The video loss channel can be skipped,
・Select VGA output.( If you check the VGA output, monitor screen quality is worse
than before.)
・If there is no VGA output on the VGA output port, press the STOP button and
DISPLAY button at the front button for about 3sec then VGA output will be on
automatically.
■ How to Setup
1) Choose the kind of Spot Output.
2) Set-up the detail of Spot Output. (Input Channel, Interval, etc.)
3) Set-up VGA Output.
4) Finish setup by pressing EXIT button.
! ・Other than a Monitor Output, a time display, a camera title, etc. are not displayed
as a Spot Output.
・If Spot Output is set-up "Auto Select" at the time of Asynchronous inputs, the
picture could be unstable. Since an output signal switches input signals directly.
or a Monitor Output screen can be built into an Auto Select. Moreover,
Interval can be set-up.
-- 75 --
VR-609