Copy Schedule; Reset - JVC VR-609 Instructions Manual

5.2.2.7 Copy Schedule

The Copy Schedule window can be opened by pressing the "Copy To" button.
・Able to copy the program under setup.
■ Copy Schedule (Days)
・Data copy on a Days-basis.
・The button highlighted with the black border indicates the day that is currently under
configuration.
・Press button for other "Days" to select/deselect.
・Press the "Copy" button to copy the program to the selected day of a week.
■ Copy Schedule (Channel)
・Data copy on a Channel-basis.
・Move the cursor to the "Source Camera" field and press the ENTER button to select a
source camera.
・Specify a source camera by using the Up/Down buttons to select a camera number. (Button
of the camera that has been selected as the source camera will not appear on the screen.)
・Move the cursor to the cameras numbered between 1 - 9, followed by pressing the ENTER
button to select/deselect accordingly.
・Press the "Copy" button to copy the program to the selected camera.

5.2.2.8 Reset

The Reset window can be opened by pressing the "Reset" button.
The program timer settings will be reset to its factory settings.
・Camera 1 - 9 ： 24-hour recording
・Alarm
・Quality
■ Operation Procedure
・Use the Up/Down/Left/Right buttons to select the item to reset, followed by pressing the ENTER
button to select/deselect accordingly. The button of the selected item will appear depressed.
・Select/Deselect each of the "Camera (1 - 9)", "Recording Quality" and "Audio" buttons, followed
by pressing the Reset button to reset selected items to their factory settings.
・Press the "All" button to select all of Camera 1 - 9, Recording Quality and Audio.
： OFF, Max/1Sec
： Q3
-- 53 --
・Always ： ON, Max/1Sec
・Motion ： OFF
・Audio ： Audio Off
VR-609