HP PROLIANT DL380 User Manual page 96

96 HP ProLiant DL380 Generation 3 Server User Guide
To install a hot-plug expansion board:
1. Extend the server from the rack, if applicable ("Extending the Server from
2. Remove the access panel ("Removing the Access Panel" on page 40).
3. Open the PCI riser cage door.
4. Press the PCI Hot Plug button to remove power from the slot. When the
5. Remove the expansion slot cover from the slot, if installed ("Removing
the Rack" on page 38).
green power LED on the slot stops flashing, power has been removed from
the slot.
Expansion Slot Covers 2 and 3" on page 92).