Extending The Server From The Rack - HP PROLIANT DL380 User Manual

38 HP ProLiant DL380 Generation 3 Server User Guide
4. Press the Power On/Standby button to place the server in standby mode (2).
5. If the server is installed in a rack, locate the server by identifying the
6. Disconnect the power cords.
The system is now without power.

Extending the Server from the Rack

1. Loosen the thumbscrews that secure the server faceplate to the front of the
2. Extend the server on the rack rails until the server rail-release latches engage.
When the server activates standby power mode, the system power LED
changes to amber.
illuminated rear UID LED button.
rack.