Expansion Board Options; Removing Expansion Slot Cover 1 - HP PROLIANT DL380 User Manual

8. Slide the power supply into the power supply bay.
9. Connect the DC power cord to the power supply.
10. Lock the cable management arm into the operating position.
11. Power up the server if it was previously powered down ("Powering Up the
12. Be sure that the power supply LED is green ("Rear Panel LEDs and Buttons"
13. Be sure that the front panel external health LED is green ("Front Panel LEDs

Expansion Board Options

The server supports PCI and PCI-X expansion boards.

Removing Expansion Slot Cover 1

1. Power down the server ("Powering Down the Server" on page 37).
Server" on page 37).
on page 15).
and Buttons" on page 11).
IMPORTANT: The optional RILOE II board can be installed only in
slot 1. If you plan to install a RILOE II board in the future, leave slot 1
unpopulated.
Hardware Options Installation 91