Table of Contents
Advertisement
40
2. Basic Job Setting
Using Automatic/Duplexing Document Feeder AF-3/AFR-7
Automatic/Duplexing Document Feeder AF-3/AFR-7 automatically feed in
sheet originals placed on the Document Feed Tray one by one for the
making of copies. After the copy cycle has been completed, it
automatically ejects the finished original onto the Document Exit Tray.
Some originals may be suitable for use in the AF-3/AFR-7, while others
may not be. Here is a guideline. Always be aware of the type of originals
you are using in the AF-3/AFR-7.
Originals Suitable for Use in AF-3/AFR-7
Type of Originals
Type of Original Paper : Plain paper
Original Size
[Normal Mode]
[Mixed Original
Detection Mode]
Original Weight
*
Lightweight Original Mode:
This mode allows you to use originals weighing in the range between 40
2
g/m
and 110 g/m
Detection mode.
Be sure to use the User's Choice to turn ON the Lightweight Original
Mode when you need to make copies from originals whose weights fall in
the above range and that are loaded in the AF-3/AFR-7.
A damaged original could result if you don't use the Lightweight Original
Mode for such originals.
Originals Not Recommended for Use:
: Sheets
: 1-sided and 2-sided (AFR-7 only) originals
: A3L, B4L, A4L, A4C, FLSL
2-in-1 (Dual Original Scanning) Mode
: A4C
1-sided and 2-sided (AFR-7 only) originals
: A3L, B4L, A4L, A4C
: 1-sided originals and 2-in-1 Mode
: 50 g/m
2-sided originals
: 60 g/m
*Lightweight Original Mode
: 40 g/m
2
when the copier is in the standard or Mixed Original
Book
Typing paper, paraffin paper, and other thin paper
Transparencies, translucent paper
Wrinkled, dog-eared, curled, or torn originals
Clipped or stapled originals
Carbon-backed originals
2
2
to 110 g/m
2
2
to 90 g/m
2
2
to 110 g/m
p. 95
Advertisement
Table of Contents
