5. Default Auto Exposure Level Adjustment
Default Auto Exposure Level Adjustment
The density level for the Default Auto Exposure Level Adjustment can be set to one of nine settings.
With copy density 5 as the middle setting, decreasing the setting value lightens the density and
increasing the setting value darkens the density.
Use the main switch to turn off the copier.
1
While holding down the Exposure Control
Key 5, turn on the copier.
Press the Exposure Control Key 5 again.
2
The copier enters the Default Auto
Exposure Level Adjustment.
Press the Exposure Control Keys 4 and
3
6 to select the density level.
Copy density 1 (lightest)
Copy density 2 (lighter)
Copy density 3 (lighter)
Copy density 4 (lighter)
Copy density 5 - middle setting
Copy density 6 (darker)
Copy density 7 (darker)
Copy density 8 (darker)
Copy density 9 (darkest)
C1159O055DA
C1159O059DA
C1159O060DA
Press the Start Key to print one copy in
4
order to check the selected density.
Press the Clear/Stop Key to enter the
5
setting and exit the adjustment.
27
C1159O057DA
C1159O058DA