E Display; Resetting The Copier - Minolta CSPRO EP1031 Manual

34

4. E Display

Resetting the Copier

Turn the Main Switch off and then on to
1
reset the copier.
If the "E" appears again, contact your service
representative.
This display indicates that there is trouble during the
charging process. Copying cannot be performed at this
time. Follow the procedure below to reset the copier.
C1159O096DA
C1159O010DA
Before Calling Your Service Representative
Before calling the service representative, note
the code being displayed.
Example: E0
Flashes alternately.
Once the service representative has been
contacted, turn the Main Switch off and unplug
the power cord.
C1159O005EA