Using The Semi-Automatic Document Handler; (Sdh); Guidelines For Originals; Positioning The Original - Minolta CSPRO EP1031 Manual

14

2. Positioning the Original

Using the Semi-automatic Document Handler (SDH)

Load the originals into the SDH . This device automatically feeds multiple originals to the copier one at a time so
that continuous copying can be performed. In order to obtain the full potential of this device, use only originals
that meet the following guidelines. Failure to do so will result in paper misfeed and damage to the original.

Guidelines for Originals

Proper Type and Size
Type: Plain paper 50 to 110 g/m
Size: A5L to A4L, Invoice to Legal
Paper Tray Capacity: 50 sheets (Never exceed the b mark indicating maximum capacity.)
Proper Conditions
Free of staples or other types of fasteners.
Free of curls, tears, folds or other imperfections.
Free of sections affixed by tape or glue.
Free of processing, such as a carbon transfer coating.
Transparencies are also not permitted.
Originals not meeting these guidelines should not be used in the SDH. They can be copied by placing
on the glass.

Positioning the Original

Adjust the Document Guide Plates to
1
match the size of the original.
The original is placed faced down on the
2
Document Feed Tray. The SDH indicator
will come on indicating SDH mode and the
Display Panel will automatically show a "1".
2
, 13 to 29 lbs
C1159O021DA
C1159O014DA
NOTE
Size and number of originals: A4 or Letter, up to
50 sheets.
Never exceed the b mark indicating maximum
capacity.
Always align the Guide Plates so that they
touch the originals. Failure to do so may cause
the originals to be fed into the copier at an
angle.
C1159O022DA