Table of Contents
Advertisement
3
3.4
Power Switch
Turning the printer on and off
To turn the printer on
➜
Set the power switch to "1".
To turn the printer off
➜
Set the power switch to "2".
Note
Do not turn off the printer while it is printing, otherwise a paper misfeed
may occur. Make sure that all print operations are finished before
turning off the printer.
Note
With Fiery X3e installed, if the printer is turned off directly, instead of
turning off the system using the control panel, the controller may be
damaged.
Note
If the printer is not used for 15 minutes, it automatically enters Energy
Saver mode.
The printer will automatically start warming up as soon as it receives
a print job, or when any cover is opened, then closed.
3-14
Before Making Prints
CF2001P
Advertisement
Table of Contents
