Table of Contents
Advertisement
2
Connecting the power cable
Only use the power cable supplied with the printer!
The laser printer requires a non-fluctuating power supply. If necessary,
ask an electrician for advice.
✔
Mains voltage: 220-240 V ± 10%
✔
Mains frequency: 50-60 Hz ± 0.3%
Make sure that the printer's power
1
switch is in the "0" position (OFF).
Insert the plug on the end of the
2
power cable (supplied) into the
power socket of the printer.
3
Insert the other end of the power
cable into a power socket.
CAUTION
Using the wrong power cable may lead to a short-circuit!
The use of a power cable of inadequate cross-section can lead to a short-
circuit.
➜
Only use an extension cable which has a higher rating than the current
consumption of the printer.
➜
Only use earthed cables.
➜
Always observe the relevant local regulations regarding the
connection of electrical equipment to the mains network.
2-12
Unpacking, installing and setting up the printer
2
1
PagePro 1100L
Advertisement
Table of Contents
