To Load Paper Into The Manual Bypass Tray - Minolta CF2001P User Manual

4

To load paper into the manual bypass tray

Paper can be fed manually through the manual bypass tray if you wish to
print onto paper that is not loaded into a drawer or if you wish to print onto
special paper, such as overhead transparencies, postcards, or thick paper
1 or 2.
Note
✔ When Fiery X3e is installed, printing from the manual bypass tray is
not supported.
1
Open the manual bypass tray.
2
Adjust the paper guides to the size
of the paper, and then load the pa-
per so that the front side of the pa-
per (the side facing up when the
package was unwrapped) faces
down. Lightly slide the paper into
the feed slot as much as possible so
that it is ready to be fed into the
printer.
? Do you need more information
on feeding paper through the manual bypass tray?
➜ Feed only one sheet of paper at a time.
➜ Prints will be made on the surface of the paper facing down when
it is loaded into the manual bypass tray.
4-16
Print Paper
CF2001P