Table of Contents
Advertisement
Control Panel Messages
Message
To print,
clear 1st tray
To print,
clear elevator tray
To print,
clear mail bin #
To print,
clear sorter area
Warming up
Waste toner full.
Call service
Waste toner full.
Please change
Waste toner
nearly full
Waste toner bottle
not set
Xxxx toner
nearly empty
Xxxx unit
near life limit
Xxxx unit
not set
Xxxx unit
not set right
Xxxx unit
over life limit
Call service
Xxxx unit
over life limit
Please change
CF2001P
Cause
The upper paper output tray
of the finisher is full of paper.
The lower paper output tray
of the finisher is full of paper.
The mail bin # of the 10-
mailbin sorter is full of paper.
All bins in the 10-mailbin
sorter are full of paper.
Warming up
The waste toner bottle is full.
The waste toner bottle is full.
The waste toner bottle will
soon be full.
The waste toner bottle is not
installed.
The toner for the indicated
color will soon be empty.
The indicated unit will soon
reach the end of its service
life.
The indicated unit is not
installed.
The indicated unit is not
installed correctly.
The service life for the
indicated unit has expired.
The service life for the
indicated unit has expired.
Action
Remove paper from the
upper paper output tray.
Remove paper from the
lower paper output tray.
Remove paper from the mail
bin #.
Remove all paper from the
mailbins.
No action required.
Ask your technical
representative to refill the
toner for the indicated color.
Replace the waste toner
bottle.
Replace the waste toner
bottle as soon as possible.
Install the waste toner bottle.
Refill the toner for the
indicated color.
Replace the indicated unit.
Install the indicated unit.
Install the indicated unit
correctly or contact your
technical representative.
Ask your technical
representative to replace the
indicated unit.
Replace the indicated unit.
5
5-3
Advertisement
Table of Contents
