Konica Minolta bizhub 200 User Manual page 63

2
10
On the E-Mail Mode screen, settings can be specified for the following.
Select the desired settings, and then touch [Enter].
– TX Size (Max.): Specify the maximum document size that can be
transmitted. Select "Letter", "Legal" or "11×17".
– TX Quality (Max.): Select the maximum resolution that can be sent.
Select "200 dpi", "400 dpi" or "600 dpi".
– Coding Method: Select the coding method for the data to be sent.
Select "MH", "MR" or "MMR". The data amount for the coding
methods increase as follows: MMR, MR, MH.
Select E-Mail Mode.
Utility/Counter
E-Mail Mode
TX Size (Max.)
TX Quality (Max.)
Coding Method
11
To change the port number, touch [Port].
– To change the port number, press the [C] (clear) key, use the key-
pad to type in the port number, and then touch [Enter].
– To return to the default setting, touch [Default].
Enter Port. Number.
Utility/Counter
Port
12
Touch [Next].
2-36
Enter
11x17
600dpi
MH
Memory
Free
Cancel Enter
Default
25
1to65535
Delete
Memory
Free
100%
100%
IP address faxing
200/250/350