9
9.4
Erasing Copy Edges ("Erase" Function)
This function can be used to set the width of loss at the edge of the copy
to either 5 mm or 7 mm, as needed. The default setting is 5 mm.
To set the "Erase" function
Note)
✔
Discuss any changes to this function with your service representative.
1
Press the [Utility] key to enter Utility
mode.
2
Touch [Administrator Mode].
3
Using the keypad, enter the four-
digit administrator access code.
9-18
Administrator Mode Operations
Konica 7915/7920