Table of Contents
Advertisement
6
4
Adjust the paper guides to the size
of the paper, and then load the pa-
per so that the front side of the pa-
per faces down. Lightly slide the
paper into the feed slot as much as
possible so that it is ready to be fed
into the copier.
?
Are the recommended overhead
projector transparencies being
used?
➜
When using the recommended
overhead projector transparencies, load them as described on
page 4-16.
5
Make sure that the screen that
allows you to select the manual
bypass tray paper size is displayed,
check that the desired paper size is
selected, and then touch [Paper
Type].
6
Touch [OHP Film], and then touch
[Enter].
7
Specify any other necessary settings.
❍
Zoom (Refer to page 6-14 for more details.)
❍
Original Image Type (Refer to page 6-18 for more details.)
❍
Density (Refer to page 6-20 for more details.)
8
Press the [Start] key.
6-10
Basic Operations
Konica 7915/7920
Advertisement
Table of Contents
