Lexmark 201 User Manual page 11

Use the
ADF paper guide
5
6 ADF output tray
Wi-Fi indicator
7
8 Memory card slot
PictBridge and USB port
9
Printer control panel
10
Paper tray
11
12 Paper exit tray
Use the
1 Scanner unit
Ink cartridge access
2
3 Ethernet port
4 USB port
5 Power supply with port Connect the printer to a power source.
6 Duplex unit
To
Keep paper straight when feeding it into the ADF.
Note: Adjust the paper guide on the ADF tray to the width of the original
document.
Hold documents as they exit from the ADF.
Check wireless status.
Insert a memory card.
Connect a PictBridge-enabled digital camera, a USB Bluetooth adapter, or a
flash drive to the printer.
Operate the printer.
Load paper.
Hold paper as it exits.
1
2
7
To
•
Access the ink cartridges and printhead.
•
Remove paper jams.
Install, replace, or remove ink cartridges.
Connect your printer to a computer, a local network, an external DSL, or a cable modem.
Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
•
Print on both sides of a sheet of paper.
•
Remove paper jams.
About your printer
3 4
11
5
6