Scanning Functions; User Interface Operation - Kyocera FS-1116MFP Operation Manual

User Interface Operation

OPERATION GUIDE

5 Scanning Functions

This product allows you to operate the scanner from within a TWAIN or plug-in
software application. As the scanner driver is not a stand-alone software, it has to be
started from within a TWAIN-compliant software application and then the scanner
driver is able to scan and load the image to your computer. The command to start
the scanner driver may vary due to different software applications. To check the
correct command, please refer to the user manual of your software application.
1
Open your TWAIN scanning application.
2
Pull down the File menu and choose Select Source.
If the Select Source command is not available on the File menu, see your
application's user's guide to determine how the TWAIN link is used.
A dialog box with a list of scanning sources appears.
3
Select or import your scanner.
You need to select the source only once, unless you want to choose another
scanner.
4
A dialog box containing scanning features appears as below:
5
Select the scanning method you want to use on the Scan Method drop-down menu.
6
Select the mode you want to use for your scans on the Image Type drop-down menu.
7
Select a scanning resolution on the Resolution drop-down menu.
8
Select the settings for the scanning features (e.g., Sharpen, Descreen, etc.) that you
want to use.
5-1