Alarms Given By The Heat Pump; Return To The Heat Pump's Factory Settings - Worcester GREENSTORE User Manaul

Alarms given by the heat pump

The menu provides information about the alarm type and when it occurred.
If there is an asterisk (*) in the menu window this means the alarm is still
active, i.e. the cause of the alarm remains. Access the Alarm logging of all
alarms (menu 11) as follows:
1. Press and hold the Heat button until Access = CUSTOMER2 is
displayed.
2. Press the Menu button.
3. Turn the menu dial clockwise until the menu Alarm logging of all
alarms (menu 11) is displayed.
4. Press the Select button and scroll using the menu dial between any
alarms that may have previously occurred. Alarms are stored in
chronological order. Read more about the heat pump's alarms under
the heading All alarms.

Return to the heat pump's factory settings

To restore the factory settings on the heat pump, access the Return to
factory settings menu (menu 12) as follows:
1. Press the Heat button until Access = CUSTOMER2 is displayed.
2. Press the Menu button.
3. Turn the menu dial clockwise until the menu Return to factory settings
(menu 12) is displayed.
4. Press the Select button.
5. Return to the factory settings by pressing the Yes button. Returning to
the factory settings will reset all user adjustments made on Customer
levels 1 and 2, such as, temperature settings and time control settings.
25
Extra functions - Customer level 2
Main menu K2
Indoor temperature
settings 1
Return Select
Main menu
Alarm logging
of all alarms 11
Return Select
Main menu K2
Indoor temperature
settings 1
Return Select
Main menu
Return to
factory settings 12
Return Select