Menu Outline For Basic Functions (Customer Level 1); Select Scrolling Information On The Menu Display - Worcester GREENSTORE User Manaul

Basic functions - Customer level 1

Menu outline for Basic functions (Customer level 1)

Temp. incr. / decr.
Page 15
Temp. fi ne-tune
Page 16
Room temperature
Page 17
Extra hotwater
Page 17
= The menu display is standard on all
heat pumps.
= The menu display is only shown on
the heat pump in combination with an
extra sensor or for a specifi c model.

Select scrolling information on the menu display

If you press the Info button in the initial menu, you will receive continuous
information about the heat pump's operation and working temperatures.
This is what to do:
Press the Info button in the initial menu. The following windows are
displayed:
Rego 637W K1
060822 16:08:15 Tu
Heat Info Menu
STANDBY
No rad heat required
No hotwater required
Page 14
HOTWATER MODE
Heat pump only
Page 14
HEAT RAD Mode
Compr. + Add. heat
Page 14
HEAT RAD REQ
Heat pump starts
in #### seconds
Page 14
Main menu
Indoor temperature Adjusting the hot
settings 1 water settings
Page 18
Temperature settings
Hot water setting
Temp. incr. / decr.
Duration of
range 0-10 1.1
add. hot water
Page 15
Temperature settings
Temp. fi ne-tune
range -10/+10 1.2
Page 16
Temp. settings
Setting of room
temperature 1.10
Page 17
12
Note
Each menu is numbered in the lower
right-hand corner; this indicates which
main display it is associated to.
Main menu
Main menu
Monitor all
temperatures
2
Page 17
Temperature readings
Return radiator GT1
2.1
Temperature readings
Page 17
Out GT2
Temperature readings
Hot water GT3
Temperature readings
Shunt, fl ow GT4
Temperature readings
Room GT5
Temperature readings
Compressor GT6
Temperature readings
Heat trfl uid out GT8
Temperature readings
Heat tr fl uid in GT9
Temperature readings
Ht trfl d(coll)inGT10
Temperature readings
Httrfl d(coll)out GT11
Rego 637W
060822 16:08:15 Tu
Heat Info
3
Page 18
Page 19
K1
Menu