Set The Time And Date - Worcester GREENSTORE User Manaul

Extra functions - Customer level 2
3. Turn the menu dial clockwise until the menu Op. time readings on HP
and add. heat (menu 7) is displayed.
4. Press the Select button and scroll through the menus using the menu
dial.
The number of hours the heat pump has been in
operation
The menu shows the number of hours that the heat pump has been in
operation since the day of installation.
The heat pump's hot water mode and heating
mode operations as a percentage
The menu shows the heat pump's allocation between hot water mode and
heating mode. The allocation is stated as a percentage.
The number of hours the electric heater has been
in operation
The menu shows the number of hours the electric heater has been in
operation since the day of installation.

Set the time and date

The heat pump has functions that are dependent on both the clock and
date. Therefore, it is important that these are correct. This is how to access
the menu Clock, setting time and date:
1. Press and hold the Heat button until Access = CUSTOMER2 is
displayed.
2. Press the Menu button.
3. Turn the menu dial clockwise until the menu Clock, setting time and
date (menu 10) is displayed.
4. Press the Select button and make your settings using the menu dial
and menu buttons.
24
Main menu
Op. time readings on
HP and add. heat 7
Return Select
Op. time readings
Heat pump in operat.
number of hours? 7.1
Return Select
Op. time readings
Distribution HP
DHW-Rad in % 7.2
Return Select
Op. time readings
Add. heat in operat.
number of hours? 7.3
Return Select
Main menu
Clock, setting
time and date 10
Return Select