Control Panel; Controls And Status Indicators - Worcester GREENSTORE User Manaul

Control panel

Control panel
All settings are made on the control panel. It also displays heat production
statistics and information about different alarms. When you have made your
settings, the control panel makes sure they are saved in the control unit.

Controls and status indicators

Power switch (ON/OFF)
Indicator on: Mains power ON.
Indicator fl ashes: Mains power OFF.
Operating status
Indicator on: The heat pump (compressor) is
operational.
Electric heater status
Indicator on: The heat pump is using additional
heat from an electric heater.
Hot water status
Indicator on: The heat pump is heating DHW in
the cylinder.
Indicator fl ashes: The heat pump has a hot water
peak or is producing extra DHW.
Alarm status
Indicator fl ashes: A fault has occurred in the heat
pump.
Indicator on: The alarm has been acknowledged
by the end user, but the fault remains. (See
section; What to do if a fault occurs).
Temp. incr. /
Heat
decr.
Pressing once gives a shortcut to the most frequently
used temperature settings.
Info
Info
Pressing once gives continuous information about the
heat pump and electrical heater operating conditions.
Menu
Menu
Press once to enter the main menu.
The main menu contains all the setting menus and
temperature displays.
Status indicators
Power switch
(ON/OFF)
Rego 637W
Menu display
060822 16:08:15 Tu
Heat Info
Menu buttons
10
K1
Menu
Menu dial
Rego 637W K1
060822 16:08:15 Tu
Heat Info Menu