Heating And Hot Water Settings; Read The Temperatures On The Heat Pump - Worcester GREENSTORE User Manaul

Heating and hot water settings

Move to the temperature settings for heating on Customer level 1 as
shown:
1. Press the Menu button in the initial menu.
Main menu
Indoor temperature
settings
Return Select
2. Press the Select button and scroll through the heating menus with the
menu dial.
Move to the temperature settings for hot water on Customer level 1 as shown:
1. Turn the menu dial clockwise until the menu Adjusting the hot water
settings is reached.
Main menu
Adjusting the hot
water settings
Return Select
2. Press the Select button and scroll through the hot water menus with
the menu dial.

Read the temperatures on the heat pump

There are several different temperature sensors in the heat pump. Each
sensor plays an important part in the heat pump's daily operations. Proceed
as follows to read the temperatures on the heat pump:
1. Press the Menu button in the initial menu.
2. Turn the menu dial clockwise until the menu Monitor all temperatures
(menu 3) is reached.
Main menu
Monitor all
temperatures
Return Select
3. Press the Select button.
4. Turn the menu dial to scroll through all the heat pump's temperature
sensors. See the next page.
1
2
3
Each menu is numbered in the lower
right-hand corner; this indicates which
main display it is associated to.
17
Basic functions - Customer level 1
Rego 637W K1
060822 16:08:15 Tu
Heat Info Menu
Note