Alarms Given By The Heat Pump; Return To The Heat Pump’S Factory Settings; Connecting The Heat Pump To The Power Supply; Installation Of Sensors - Worcester Greenstore 6kW Instruction Manual

Alarms given by the heat pump

Return to the heat pump’s factory settings

Connecting the heat pump to
the power supply
Main menu K2
Indoor temperature
settings 1
Return Select
High and low current cables should be routed separately in order
to avoid interference on the sensors. Wiring diagram is supplied
Main menu
with the heat pump.
Alarm logging
of all alarms 11
Return Select
Main menu K2

Installation of sensors

Indoor temperature
settings 1
Return Select
Main menu
Return to
factory settings 12
Return Select
Warning
Note