Table of Contents
Advertisement
Carephone 61
4.4.2
Sound signal in synthetic speech disabled mode
When the Carephone 61 is in synthetic speech disabled mode,
certain technical messages are announced by sound signals.
Sound Signal
1 beep
2 beeps
3 beeps
4 beeps
4.4.3
Local voice announcements from the unit
When pressing a button
Voice announcement
"Emergency call"
"Call activated"
"Stop"
"Service call"
"Emergency call cleared" When a repeated call is acknowledged on the unit.
"Call ended"
"Radio button[x]"
"Alarm input"
Error messages
Voice announcement
"Power failure"
"Line failure"
"Transmission failure"
"Unit battery empty"
Bosch Security Systems
Meaning
power failure
line failure
battery empty
transmission failure
Meaning
When the emergency call button is pressed.
Connection failed - unit is calling again.
When the action button is pressed during the pre-
alarm. The call is cancelled.
When the action button is pressed, if it is
programmed as a service button or direct call.
When a call back is acknowledged on the unit.
When a wireless transmitter is pressed, x being
the number of the transmitter, from 1 to 10.
When the external alarm input is activated.
Meaning and Action needed
Power failure. Check the power connection.
Connection to the telephone network has been
lost. Check the connection.
Emergency call not sent. Contact monitoring
centre.
Backup battery is empty. Connect to the mains
power supply. Contact the monitoring centre.
User Manual
Product Description | en
F.01U.239.30x | V1 | 2011.06
11
Advertisement
Table of Contents
