(4.3) Changing Black Gamma Correction Level; (4.4) Changing Detail (Outline) Gain; (4.5) Changing Pedestal; (4.6) Changing Dnr(Digital Noise Reduction) - Toshiba IK-HD2E Instruction Manual

4 3 Changing black gamma correction level
* When OFF is selected in GAMMA ON/OFF selection line, the display BLACK GAMMA turns off
automatically. So the black gamma correction level change cannot be changed.
4 4 Changing detail (outline) gain
4 5 Changing pedestal
(a) Changing master pedestal
Move the " " to M. PED by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.
M. PED decreases
(b) Changing R. PED (red pedestal)
Move the " " to R. PED by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of red pedestal by pushing [DATA UP], [DATA DOWN] buttons.
R. PED decreases
(c) Changing B. PED (blue pedestal)
Move the " " to B. PED by pushing [MENU UP], [MENU DOWN] buttons.
Select the desired value of blue pedestal by pushing [DATA UP], [DATA DOWN] buttons.
B. PED decreases
4 6 Changing DNR (Digital Noise Reduction)
Move the " " to DNR by pushing [MENU UP], [MENU DOWN] buttons.
Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
Note:
When DNR is set to ON, noise is reduced, but shooting a fast moving object may affect the
video clarity.
DATA UP
200 0
DATA DOWN
DATA UP
100 0
DATA DOWN
DATA UP
100 0
DATA DOWN
M. PED rises
200
R. PED rises
100
B. PED rises
100
26